Ok, I’ve fought with this off and on for a-while, but I finally found the right combination. First of all, forget freeNX. The NoMachine folks have released a “desktop” edition of their latest product called “NX Desktop Server” that is free for personal use (2 users/connections).
Before proceeding, be sure to *completely* remove any previous versions of any of the FreeNX files or libraries. Undo what you have already done, and remove the FreeNX source URLs from your /etc/apt/sources.list.
———————–
Step 1 – Download
———————–
Download “NX Desktop Server DEB for Linux” from:
https://www.nomachine.com/select-pack…?os=linux&id=1
Download “NX Node DEB for Linux” from:
https://www.nomachine.com/download-node.php?os=linux
Download “NX Client DEB for Linux” from:
https://www.nomachine.com/download-client-linux.php
———————–
Step 2 – Install
———————–
Install the DEB files in this order:
nxclient
nxnode
nxserver
I just right-clicked on them and installed them…use apt-get if you prefer.
———————–
Step 3 – Configure
———————–
Load up your /etc/ssh/sshd_config file into an editor:
sudo nano /etc/ssh/sshd_config
Add the following line & save the file
AuthorizedKeysFile /usr/NX/home/nx/.ssh/authorized_keys2
Restart sshd by typing:
sudo /etc/init.d/ssh restart
Verify nxserver is configured properly by typing:
sudo /usr/NX/bin/nxserver –status
This should return:
NX> 900 Connecting to server ..
NX> 110 NX Server is running.
NX> 999 Bye.
If you get any errors here, then something is wrong with your configuration. If not, then NX Desktop Server should be installed.
Before anyone complains, yes, I’m using the NoMachine server key just because it’s easy. If you want to generate your own key, you can. These instructions worked for me on Dapper….YMMV. Let me know if you have trouble…..hopefully my notes were correct.
Good luck!
this tutorial writen from jkbrowne at uBuntuForums.com
Notice: Only variables should be assigned by reference in /home/enamyid/public_html/hendra-k.net/wp-content/plugins/subscribe-to-comments/subscribe-to-comments.php on line 590
chris berkata:
tutorial terus..
Notice: Only variables should be assigned by reference in /home/enamyid/public_html/hendra-k.net/wp-content/plugins/subscribe-to-comments/subscribe-to-comments.php on line 590
scampage berkata:
must update your web content
Notice: Only variables should be assigned by reference in /home/enamyid/public_html/hendra-k.net/wp-content/plugins/subscribe-to-comments/subscribe-to-comments.php on line 590
brian berkata:
i like your share buttons, very comprehensive.
Notice: Only variables should be assigned by reference in /home/enamyid/public_html/hendra-k.net/wp-content/plugins/subscribe-to-comments/subscribe-to-comments.php on line 590
vdj tutorial berkata:
nice info friend..keep continues posting..join here free link exchange..Link exchange free
Notice: Only variables should be assigned by reference in /home/enamyid/public_html/hendra-k.net/wp-content/plugins/subscribe-to-comments/subscribe-to-comments.php on line 590
Intan Permata berkata:
nice tutorial.. thanks pal